LITSCO's Streamline FlatWall SM panel is an overlapping metal panel which is installed to provide a shingle effect which is also an excellent design for shedding water. Due to it's compatibility with almost any jobsite condition, and the many standard sizes, this makes an excellent panel for design purposes.
Integrated clip provides solid fastening to a variety of substrates. Rectangle, square & diamond shapes can be installed vertically or horizontally, and on curved surfaces.
ASTM E330 tested for structural integrity.
All flashing and trim will be fabricated by LITSCO or a qualified fabricator. Flashing shall be .032" -.040" aluminum or 24ga steel.
Panels can be installed directly to a variety of substrates, however, custom cleats may be required to provide adequate pull out resistance.
#12 pancake self-drilling stainless steel for metal substrate.
Start from corner location and install sideways first, then work upward.
• Aluminum, .032" / .040", Finish per specification
• Copper, 16oz / 20oz Cold Rolled, Lead Coated or Freedom Gray
• Rheinzink Zinc, 0.8MM / 1.0MM, Finish per specification
• Stainless Steel, .018" (26GA) / 24GA, Finish per specification
See the Sheet Metal page for available material colors & finishes
Building Insulation Assembly
LITSCO's Streamline metal wall panels can fit a variety of applications, but does your wall assembly meet NFPA285 ratings? Use this guide to help choose what product assembly is right for you: