LITSCO's Standing Seam panel is an ideal solution for both vertical & low slope roof applications. The 1" high seam blends architectural design with superior craftsmanship. This is a non-structural panel with a double lock seam which still provides superior weathertighness on greater than 2:12 slopes.
8ft & 10ft lengths, or custom lengths can be made to order.
To increase color choices, Kynar painted aluminum and galvanized sheets are available too. These high quality sheets are eligible for a 20 year paint finish warranty.
The 1" high seam conceals both the one-piece clip and fastener.
Multiple widths available to optimize pricing.
All flashing and trim will be fabricated by LITSCO or a qualified fabricator. Flashing shall be .032" -.040" aluminum or 24ga steel.
Streamline Flush TG panels can be installed over both metal framing & solid substrate.
#12 pancake Phillips head, choice of wood or metal tip.
Set panel from bottom/eave location and install clips as recommended. Minimum 24" o.c. The double lock seam is mechanically closed after panels are installed. Optional in-seam sealant available for ultimate in watertightness.
• Aluminum, .032" / .040", Finish per specification
• Copper, 16oz / 20oz Cold Rolled, Lead Coated or Freedom Gray
• Rheinzink Zinc, 0.8MM / 1.0MM, Finish per specification
• Stainless Steel, .018" (26GA) / 24GA, Finish per specification
See the Sheet Metal page for available material colors & finishes
Visit the Standing Seam page for additional photographs